Minimizing thee risk of chemical incidents

The water/steam cycle is a sensitive process that involves a high risk of chemical issues during its commissioning. Such incidents can cost up to 8 million euros in maintenance and capital expenditures. With the right support during commissioning, these risks can be significantly reduced.

Minimizing thee risk of chemical incidents

The water/steam cycle is a sensitive process that involves a high risk of chemical issues during its commissioning. Such incidents can cost up to 8 million euros in maintenance and capital expenditures. With the right support during commissioning, these risks can be significantly reduced.

Independent water/steam cycle expert support ensures faultless start-up

> Enhance process efficiency

Conducting tests during the commissioning phase enables to track and trace leaks or impurities in the water/steam cycle. In this way, they can be addressed before affecting the efficient functioning of the process.

> Increase availability

Chemistry-related issues can cause delay during commissioning and result in long periods of downtime afterwards during operations. Addressing these issues before actual start-up helps maximize plant availability.

> Receive objective expert advice

During commissioning, Laborelec provides objective, technical support. Our independence from manufacturers guarantees advice that best meets the plant’s needs.

Working in close collaboration with our water/steam cycle experts, power plants in France, Italy, Hungary, Belgium, Latin and South America, Middle East, etc. avoided chemistry-related problems during commissioning.

In order to minimize the risk of water/steam cycle incidents, Laborelec offers a wide range of technical support services during project commissioning. We start with the review and validation of the commissioning procedures and then assist customers during the pre-operational cleaning, the first firing, and the first steam to steam turbine.

Following the right procedures reduces the risk of incidents during commissioning. Based on its long-term experience, Laborelec can evaluate commissioning procedures based on international best practices.

Laborelec offers technical support during the pre-operational chemical cleaning (PREOPIS) of the water/steam cycle equipment. Our goal is to ensure an adequate protection layer of the tubing during operations.

Our experts assess the effectiveness of the physical cleaning of the pipes through high-speed steam blow. This ensures that all small particles are removed from the pipes.

Before implementing the water/steam cycle, our experts conduct a variety of quality assurance analyses. During the steam turbine by-pass operation and the first steam to steam turbine period, our experts focus on monitoring steam quality, condenser performance, and feed water purity.

Laborelec offers various additional support services:

  • Degassed cation conductivity analyses, which can help decrease the water/steam cycle’s start-up time 
  • Carry over tests to control the boiler demister‘s performance 
  • Audit during first months of operation

Independent water/steam cycle expert support ensures faultless start-up

> Enhance process efficiency

Conducting tests during the commissioning phase enables to track and trace leaks or impurities in the water/steam cycle. In this way, they can be addressed before affecting the efficient functioning of the process.

> Increase availability

Chemistry-related issues can cause delay during commissioning and result in long periods of downtime afterwards during operations. Addressing these issues before actual start-up helps maximize plant availability.

> Receive objective expert advice

During commissioning, Laborelec provides objective, technical support. Our independence from manufacturers guarantees advice that best meets the plant’s needs.

Working in close collaboration with our water/steam cycle experts, power plants in France, Italy, Hungary, Belgium, Latin and South America, Middle East, etc. avoided chemistry-related problems during commissioning.

In order to minimize the risk of water/steam cycle incidents, Laborelec offers a wide range of technical support services during project commissioning. We start with the review and validation of the commissioning procedures and then assist customers during the pre-operational cleaning, the first firing, and the first steam to steam turbine.

Following the right procedures reduces the risk of incidents during commissioning. Based on its long-term experience, Laborelec can evaluate commissioning procedures based on international best practices.

Laborelec offers technical support during the pre-operational chemical cleaning (PREOPIS) of the water/steam cycle equipment. Our goal is to ensure an adequate protection layer of the tubing during operations.

Our experts assess the effectiveness of the physical cleaning of the pipes through high-speed steam blow. This ensures that all small particles are removed from the pipes.

Before implementing the water/steam cycle, our experts conduct a variety of quality assurance analyses. During the steam turbine by-pass operation and the first steam to steam turbine period, our experts focus on monitoring steam quality, condenser performance, and feed water purity.

Laborelec offers various additional support services:

  • Degassed cation conductivity analyses, which can help decrease the water/steam cycle’s start-up time 
  • Carry over tests to control the boiler demister‘s performance 
  • Audit during first months of operation